Beranda CIVIL ENGINEERING PROGRAM ABAQUS Adhesive Joints and Composite Material Abaqus Tutorial

Adhesive Joints and Composite Material Abaqus Tutorial

373
0

MP4 | h264, 1280×720 | Lang: English | Audio: aac, 44100 Hz | 5h 13m | 3.1 GB

What you’ll learn:
2D and 3D surface cohesive method
2D and 3D element cohesive method
How to model flexible adhesive
how to model bonded joint (DCB, ENF, SLJ)
2D and 3D XFEM method
Buckling and Post Buckling

Requirements
Students should have basic knowledge of Abaqus software as we are not explaining feature in this tutorial
The Last version of Abaqus

Description
Welcome to the Adhesive Joints and Composite Material Abaqus Tutorial, the only course you need to learn how to model adhesively bonded joint and composite material in Abaqus software. This course is specially designed for mechanical, civil engineering students or engineers who want to expand their finite element knowledge. This course will teach you the theory behind input parameters as well as modelling and analysing the results.

What you will get in this course:

**This Course is the divided into the 8 sections and in each section, I try to teach you sth new in each section so, in order to get the most advantage of it, I highly recommend you to follow the course in order as the basic terms have been only explained in the initial sections.

Section 1: 2D adhesively bonded DCB (cohesive element)

In this section, you will learn how to model two dimensional double cantilever beam (DCB) using cohesive element method.

Section 2: 2D Adhesively bonded SLJ (Surface-Based Cohesive)

In this section, you will learn how to model two dimensional Single-lap joint using surface-based cohesive zone.

Section 3: 3D adhesively bonded DCB (Cohesive element)

In this section, you will how model three dimensional double cantilever beam using cohesive element method.

Section 4: 2D adhesively bonded DCB (XFEM method)

In this section, you will become familiarize with eXtended finite element method (XFEM) to model two dimensional double cantilever beam.

Section 5: 2D adhesively bonded ENF (XFEM method)

In this section, you will learn how to model two dimensional end notched flexure beam using eXtended finite element method.

Section 6: 2D adhesively bonded ENF (Cohesive element method)

In this section, you will learn how to model two dimensional end notched flexure using cohesive element method.

Section 7: Flexible adhesive (New Update May 2020)

This is a new section is that I added to this course in May 2020, This section will help you to learn how to model flexible adhesive in Abaqus software. The following subjects will be discussed in this section: Hyper-elastic properties of flexible adhesive, Bulk flexible Specimen, Single-lap joint with flexible adhesive, Trapezoidal traction separation law for flexible adhesive.

Section 8: Buckling and Post Buckling of Composite Plate

This section will help you to learn how to composite plate and analyse buckling and post-buckling condition on the plate.

Who this course is for
Anyone who wants to learn how to model cohesive parameters in 2D, 3D, XFEM and modeling buckling in Abaqus software.

DOWNLOAD

Konten berikutnya khusus bagi buyer yang telah membeli
Premium Membership

Daftar disini
Artikel sebelumyaAbaqus CAE : Learn Civil and Geotechnical Analysis (Level 2)
Artikel berikutnyaComputer Modeling using ABAQUS for Beginners
Subscribe
Notify of
guest
0 Comments
Inline Feedbacks
View all comments