Senin, 1 Juni 2020

EUROCODE

Beranda CODE EUROCODE

Designers’ Guide to Eurocode 3 (En 1993-1-1): Design of Steel Structures

4
After some 25 years in preparation, the key parts of EN 1993 Eurocode 3: Design of steel structures have now been finalised. "Designers' Guide...

Designers Guide to Eurocode 2 (EN 1992-1-1 and EN 1992-1-2): Design of Concrete Structures

2
EN 1992 - 1 - 1 has been written in such a way that the principles of the Code will generally apply to all...

Designers’ Guide to Eurocode 1 (EN 1991-1-4 ): Actions on structures, general actions part...

0
EN1991-1-4, Eurocode 1: Actions on structures -General actions - Part 1-4: Wind actions, is the head code for wind actions on structures and describes...

Integral Concrete Bridges to Eurocode 2: Commentary and a Worked Example of a Two...

0
Applies the design considerations of Eurocode 2 and the National Annexes to a two-span integral bridge comprising pretensioned precast concrete beams with reinforced concrete...

Design Aids for EC2: Design of Concrete Structures : Design Aids for ENV 1992-1-1,...

0
Eurocode 2 is the key document for future structural design in concrete throughout Europe. To use the Code effectively, structural engineers need a range...

Worked Examples According to EN1993-1-3: Eurocode 3 Part 1.3

0
The examples have been updated following the provisions given in EN 1993-1-3. Some new examples have been also included. These examples show applicability of...

Manual for the Design of Timber Building Structures to Eurocode 5

0
The Institution in conjunction with TRADA have published the Manual for the design of timber building structures to Eurocode 5, a new book and...

Seismic Design of Buildings to Eurocode 8

0
Practical information and training has become urgently needed for the new Eurocode 8 on the Design of Structures for Earthquake Resistance, especially in relation...

Bridge Design to Eurocodes

0
Workshop on Bridge Design to Eurocodes The workshop on "Bridge Design to Eurocodes" with worked examples was held on October 4-6, 2010 in the Austrian...

Seismic Design to Eurocodes

2
The short Course on Seismic Design to EC8 by Dr. Jack Pappin, Arup, Hong Kong, 14th December 2012, The Institution of Engineers Malaysia, Petaling...